 |
Parts required
- Fan belt ~975 mm long, it will most likely have 975 in the part number.
- Three Land rover series III bottom radiator hoses.
- Fuel pipe.
- exhaust.
- Sherp starter motor.
- Sherpa flywheel.
- Two rubber mounts for the oil cooler, mini rear exhaust hangers can be used.
- An oil seal for the adapter plate, this is a viton oil seal 4.125"x.5x3.5". It's used
on Sherpa vans and Montego and Meastro cars
- Block to adapter plate gasket, see adapter page for details.
- Fan Belt. Try a 975mm belt, it will have 975 in the pn.
- Montego Engine.
- Adapter plate.
- Engine and alternator mounts.
- Montego wiring harness.
- Montego glow plug relay.
- Some radiator hoses.
- Exhaust.
|
|