cover Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16


- 15 -

SPECIAL EQUIPMENT.

Cross-slide with rear toolpost......................................To suit standard compound slide.
Cross-slide with rear toolpost..................................With two teee slots for special toolpost to replace compound slide and alternative to above.
Change gears to cut non-standard pitches........................1 to 322 T.P.I.
Tailstock with built-in live centre.............................For high speed work.
Remote control switchesTotally enclosed START/STOP push button switch for each starter.

SPINDLE SPEED RANGES.

25 to 1645 R.P.M.................................................Standard model
29 to 2220.......................................................Alternative to standard.
40 to 3100 R.P.M.................................................Slight extra charge.

Continued........



<Created on>Page cobbled together on the 3rd July 2003</Created on>

Last updated around 2004

I will put the rest together sometime[07/10/2007]