ELECTRICAL EQUIPMENT.
| Motor rating (Drive)....................... | 400/440 Volt, 3 Phase, 50 Cycles, 1430 R.P.M, 3 H.P. Footmounting |
| Motor rating (Pump).......................... | 400/440 Volt, 3 Phase, 50 Cycles, 2800 R.P.M 1/8 H.P. Flange MTG. |
| Starter (drive)............................... | Totaly enclosed, Direct on, SCI 3H.P. Solenoid operated, Magnetic overcurrent relay, Time lag oil dashpots, Hand reset overload. 400/440 Volt, 50 Cycles. |
| Starter (Pump)................................ | Totaly enclosed, Direct on, SCF 1/8 H.P as above. |
| Remote control switches | Totally enclosed START/STOP push button switch for each starter. |
| Isolator...................................... | Totally enclosed, knife pattern, Automatically isolates on removal of cover |
STANDARD EQUIPMENT
| 3 H.P. 400/440 Volt, 3 Phase, 50 Cycles motor complete with control gear. | |
| Face plate................................................ | 11 inches diameter. |
| Driving plate............................................. | 5 inches diameter. |
| Spindle sleeve............................................ | No. 2 Morse internal taper. |
| Centre for headstock...................................... | No. 2 morse taper. |
| Centre with ejection spigot for tailstock................. | No. 2 Morse taper. |
| Toolpost complete with collar, rocker and screw........... | Std. 5/16" Toolholder cap. |
| Drill chuck, shank and key................................ | 3/8" capacity. |
| Spindle sleeve ejector rod. | |
| Cam-lock spindle key. | |
| Adjustable pin spanner | |
| Change gears (4 in all)................................... | 25T; 48T; 63T; 2 off. |
| Assembled to machine prior to dispatch.................... | Complete with bearings and keys. |
| Follow rest with two jaws................................. | 1/8" to 1-1/2" diam. capacity. |
| Belts. | |
| 1 Flat Belt. Endless Vulcanised........................... | 32" x 1" x 2.5 m/m. |
| 3 Vee Ropes 40 A. 2 Vee Ropes 90 B. | |
Continued........
<Created on>Page cobbled together on the 3rd July 2003</Created on>
Last updated around 2004
I will put the rest together sometime[07/10/2007]