Untitled

- 12 -

SPECIFICATION. (Continued)

Swing over bed.......................	12-1/2" diameter	316 mm.
Swing over cross-slide...............	6-3/4" diameter	171 mm.
Centre height........................	6 inches	152 mm.
Distance between centres.............	30 inches	762 mm.
Movement of saddle...................	27-7.8 inches	708 mm.
Movement of cross-slide..............	6 inches	152 mm.
Hole through spindle.................	1-25/64" diameter	33.5 mm.
Spindle internal taper...............	No. 12 JARNO
Spindle nose register................	3-1/2" dia Conical Cam lock
Tailstock internal register..........	No. 2 MORSE
tailstock "set-over"..................	3/8" maximum	10 mm.
Leadscrew dia. & thread..............	1" dia. x 8T.P.I Acme
Number of spindle speeds.............	Twelve
Range of spindle speeds..............	25 - 1645 R.P.M
Number of feed changes...............	Fifty
Range of saddle feeds................	.001" to .061"	.025 to 1.55 mm
Range of cross-slide feeds...........	.0005" to .03"	.012 to .76 mm
Number of standard thread changes....	Fifty
Range of metric threads..............	.25 to 4 mm pitch
Range of threads per inch............	3 to 92
Number of metric threads.............	Thirty-two
Toolpost size........................	Accepts STD.5/16" square tool
Drive motor H.P and speed............	3 H.P. 1430 R.P.M
Pump motor H.P. and speed............	1/8 H.P 2800 R.P.M
Clutch pulley speed..................	1020 R.P.M

Belts (motor) No. and size............	Three A.40 (Vee ropes.)
Belts (spindle) No. and size..........	Two B.90 (Vee ropes.)
Overall length of bed.................	61 inches	1549 mm.
Overall length........................	70 inches	1778 mm.
Overall width.........................	30 inches	762 mm.
Overall height........................	48 inches	1219 mm.
Nett weight...........................	29 cwt.	1473 kg.

Continued........